Whether you’re painting, cleaning, building or tackling any other serious job at height, a quality scaffolding tower is essential for the enthusiastic home handyman.
With a wide non slip platform you’ll have plenty of room to move around safely. The tower is sturdy with tough cross braces for exceptional stability - exactly what you want when you’re high up off the ground! The lockable rubber castor wheels make it easy to roll it to your next spot. You can even work on uneven surfaces simply by adjusting the height of one side of the platform.
This scaffolding tower has been robotic welded then fully hot dip galvanised. This means the joints aren’t going to rust or become weak, even if you leave it out in the rain. The rivetless, weldless joints in the platform also give it extra strength, so not only is it super reliable, this scaffolding will make sure you get the job done safely as well.
A solid scaffolding tower is a great investment that will last for years - saving you the cost and trouble of hiring one again and again. Order yours today. You’ll wonder how you ever did without it.
Comes with a 2 Year Trade Tested warranty.
This kitset includes all the parts you need to construct the tower as pictured. The user should be aware of Australian safety requirements when assembling and using scaffolding.
Important Safety Requirements
- For DIY/domestic use only. This tower configuration must not be used on a worksite. See Worksafe for more information.
- We recommend securing the tower to a building, or using outriggers to ensure stability.
- Refer to our Scaffolding Tower Safety Guide. Read fully before using this scaffolding.
• Full galvanised steel construction
• Hot-dip galvanised finish
• Robotic welded
• Fully corrosion-resistant
• Non-slip tread on planks
• Ladders provide access from both sides
• Height adjustable for use on uneven surfaces
• Lockable, anti-wear non-slip rubber castors
• Load tested to AS/NZS 1576.3:1995
• 2 Year warranty
- Ladder frame x 4
- Platform planks (1905mm x 240mm) x 3
- 350mm base plate and lockable castor wheel x 4
- Diagonal brace bars x 4 sets
Assembled dimensions: 3.5m (H) x 1.9m (W) x 0.95m (D)
Maximum recommended working height: 3.5m
Material: Fully hot dipped galvalised steel
Frame diameter: 42.7mm
Frame steel thickness: 2.0mm
Castor diameter: 150mm
Total load rating: 350kg
Assembled weight: 125kg
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Joy, Manly - November 2016
John, Altona North - October 2015
Jessica, Hobart - July 2015